Altos Hornos de México (AHMSA) in Monclova contracted Russula to replace the 2Hi housings and repair the current foundation of the F2 stand. Russula provided on-site surveys, detailed engineering, technical expertise, installation preparation, construction management, installation supervision and commissioning services. The modifications occurred during the regular maintenance outage in January 2017. A multidisciplinary team of Russula experts were on-site to ensure the successful completion of the project, which improved the mill performance and operating risks.
In order to improve the hot strip mill reliability, the existing 2 Hi housings needed to be replaced and retrofitted with new housings. First, Russula conducted an on-site survey to identify all the steps necessary to replace the housings, planning and recourse allocation. In close collaboration with AHMSA, Russula also conducted various studies to determine the best hoisting equipment, which was a gantry crane, then defined the correct installation of the crane taking into account the weights during the maneuver, stability and load transmission.
During the shutdown, hydraulic, grease and lubrication systems, cables, railing, platforms and the edger ventilation ducts were all removed previously to prevent interfering with the extraction of the existing housings. Once the housings and bedplates were removed it was necessary to repair the sixteen 2 Hi mill anchors. After the bedplates were installed and aligned, the new housings were erected, aligning the whole assembly according to AHMSA standards.
Russula also assisted in the replacement of the entry and exit roller tables of the 2 Hi mill as well as the exit table of the 2nd section of Furnace 4. This included repairing the foundation and disassembly and replacement of the turrets, guides, electrical motors and transmissions.
After conducting an extensive on-site analysis, it was determined that the existing foundation for the F2 finishing mill stand was structurally insufficient and needed to be repaired. As part of a multi-disciplined project execution team, Russula provided basic and detailed mechanical, civil, structural and electrical engineering, procurement, and construction management services to remove and rebuild the existing foundation and reinstall the F2 finishing stand. While the detailed engineering work was carried out in the Russula headquarters in A Coruña, Spain, a team of Russula engineers were on-site from the start of the project to conduct the field survey and identify all the equipment that would be affected by the modifications.
The Russula project team was highly integrated with the AHMSA organization, aligned to the management objectives and committed to a speedy delivery of the improvements. Since the hot strip mill at AHMSA was producing during the preinstallation phase of the new housings, this presented safety and scheduling challenges.
A team of Russula experts, specialized in civil, mechanical and electrical engineering was on-site to supervise the replacement of the new 2 Hi housings, the entry and exit roller tables and the F2 stand foundation. All the modifications were conducted during the 28-day-long regular maintenance shutdown in January, 2017. Russula supported the cold and hot commissioning.
Russula is also responsible for the basic civil engineering, detailed mechanical and electrical engineering,
start-up supervision and training. The mechanical and electrical equipment was delivered to the plant in November 2016. The hot strip mill was successfully commissioned in March 2017 and is back in operation.
|PHPSESSID||La cookie PHPSESSID es nativa de PHP y permite a los sitios web almacenar datos de estado serializados. En el sitio web se utiliza para establecer una sesión de usuario y para pasar los datos de estado a través de una cookie temporal, que se conoce comúnmente como una cookie de sesión. Estas Cookies solo permanecerán en su equipo hasta que cierre el navegador.|
|Google analytics (__utma, __utmb, __utmc, __utmz, _ga)||Estas cookies se utilizan para recoger información sobre el uso de nuestro sitio web por parte de los visitantes. Utilizamos la información para elaborar informes y para mejorar el sitio. Las cookies recopilan información de forma anónima, que incluye el número de visitantes al sitio, el lugar de procedencia al sitio de los visitantes y las páginas visitadas.||Más información en Tipos de cookies que utiliza Google.|
|Youtube(ACTIVITY, APISID, HSID, LOGIN_INFO, PREF, SID, VISITOR_INFO1_LIVE, YSC, demographics, dkv)||Se utiliza YouTube para ofrecer vídeos útiles o vídeos informativos. Youtube almacena información para poder generar estadísticas sobre las visitas de videos incrustados en otras páginas.||Más información en Tipos de cookies que utiliza Google.|
|Google Maps (APISID, HSID, NID, PREF, S, SAPISID, SID, SSID, S_awfe, khcookie)||Mostrar dónde se encuentran las oficinas de nuestros diferentes servicios mediante Google Maps.||Más información en Tipos de cookies que utiliza Google.|